specifications are subject to change without notice (24.10.05) 1 product description ordering key delay on operate multi-voltage delay on oper- ate timer with 7 selectable time ranges within 0.1 s and 100 h. for mounting on din- rail (DAA01) or plug-in (paa01). ? time range 0.1 s to 100 h ? knob selection of time range ? knob adjustable time setting ?automatic start ?repeatability: 0.2% ? output: 8 a spdt or 2 x 8 a spdt relays ? for mounting on din-rail in accordance with din/en 50 022 or plug-in ? 22.5 euronorm or 36 mm plug-in module housing ? combined ac and dc power supply ? led indication for relay status and power supply on output 1 or 2 x spdt relays rated insulation voltage 250 vac (rms) contact ratings (agsno 2 ) resistive loads ac 1 8 a @ 250 vac dc 12 5 a @ 24 vdc small inductive loads ac 15 2.5 a @ 250 vac dc 13 2.5 a @ 24 vdc mechanical life 30 x 10 6 operations electrical life 10 5 operations (at 8 a, 250 v, cos ? = 1) operating frequency < 7200 operations/h dielectric strength dielectric voltage 2 kvac (rms) rated impulse withstand voltage 4 kv (1.2/50 ?) output specifications type selection daa 01 c m24 housing function type item number output power supply mounting output housing supply: 24 vdc and 24 to 240 vac supply: 24 to 240 vac/dc din-rail 1 x spdt d-housing DAA01cm24 2 x spdt DAA01dm24 plug-in 1 x spdt p-housing paa01cm24 2 x spdt paa01dm24 time specifications time ranges knob selectable 0.1 to 1 s 1 to 10 s 6 to 60 s 60 to 600 s 0.1 to 1 h 1 to 10 h 10 to 100 h setting accuracy 5% repeatability 0.2% time variation within rated power supply 0.05%/v within ambient temperature 0.2%/? reset power supply interruption 200 ms type DAA01, paa01 timers DAA01 paa01 power supply overvoltage cat. iii rated operational voltage (iec 60664, iec 60038) through terminals: (DAA01c) a1, a2 or 24 vdc 15% and (paa01c) 2, 10 24 to 240 vac + 10% -15%, 45 to 65 hz (DAA01d) a1, a2 or 24 to 240 vac/dc (paa01d) 2, 10 + 10% - 15%, 45 to 65 hz supply specifications voltage interruption 10 ms rated operational power ac supply 4 va dc supply 1.5 w
2 specifications are subject to change without notice (24.10.05) l(+) n(-) a1 15 25 16 26 18 28 a2 DAA01c... DAA01d... DAA01d... DAA01, paa01 power on delay 100 ms reaction time instantaneous contact < 20 ms from power on indication for power supply on led, green output relays on led, yellow (flashing when timing) environment (en 60529) degree of protection ip 20 pollution degree 3 (DAA01), 2 (paa01) (iec 60664) operating temperature -20 to +60?, r.h. < 95% storage temperature -30 to +80?, r.h. < 95% housing dimensions din-rail version 22.5 x 80 x 99.5 mm plug-in version 36 x 80 x 94 mm weight approx. 130 g screw terminals (DAA01) tightening torque max. 0.5 nm according to iec en 60947 approvals ul, csa rina (DAA01 only) ce marking ye s emc electromagnetic compatibillity immunity according to en 61000-6-2 emission according to en 61000-6-3 timer specifications according to en 61812-1 general specifications operating diagram power supply relay 1 relay 2 (delayed) relay 2 (istantaneous) t t led wiring diagrams centre knob: lower knob: time setting on relative setting of time range scale: 1 to 10 with respect to the chosen range time setting mode of operation the yellow led, flashing when timing, is on as soon as the relay turns on. the second relay can operate as instantaneous or delayed changeover contact. the selection is made by a dip- switch placed under the plas- tic door on the device s front. the set delay period begins as soon as the power supply is connected. at the end of the set delay the relay oper- ates and does not release until the power supply is interrupted for at least 200 ms. if the power supply is interrupted for at least 200 ms before the relay operates the time is set to zero and the circuit is ready for a new time period. l(+) n(-) 2 111 48 39 paa01c... paa01d... paa01d... 10 DAA01 paa01 on off on off on off DAA01c... DAA01d... DAA01d... paa01c... paa01d... paa01d...
specifications are subject to change without notice (24.10.05) 3 DAA01, paa01 22.5 80 83.5 99.5 63 28.5 dimensions 36 80 94 28.5 63 90 din-rail plug-in
|
